Kentfaith Deals Today Most Wished For Camera Tripod Thread 3 8 Kentfaith is committed to creating the ideal Camera Tripod Thread 3 8 envisioned by users, redefining the Camera Tripod Thread 3 8 experience through exquisite craftsmanship. To meet your most desired perfect choice, enjoy today's promotion.
K&F Concept Universal Anti-Slip Rubber Tripod Foot Spikes Compatible with 1/4 inch Thread Tripod Monopod Legs Feet Replacement Parts (3 PCS)
Most Wished For
-UNIVERSAL: The rubber tripod feet spikes replacements fit all tripods and monopods with 1/4 inch thread mounting.
-ANTI-SLIP: Each tripod spike foot is made of silicone rubber, which has a stronger grip to prevent tripods and monopods slip and provide extra stability even if in uneven terrain.
-EASY TO INSTALL: It is practical and easy to use. No need to use extra tool, just simply screw it in and then use it on your tripod.
-MULTIPURPOSE: The tripod feet spike allows the tripod leg to dig deep into soft surfaces,and keep your tripod stable when you're shooting on softer looser ground such as snow, sand, etc. it is also suitable for outdoor and indoor use.
-Note: This item can be installed on K&F Concept's tripod with 1/4" threaded holes, also suitable for Non-K&F CONCEPT Brand's
Original Price A$20.99
Discounted Price A$20.99
Total Save A$0.00
Tripod Ball Head 360° Tripod Head 17.63lbs with 1/4" Thread Quick Release Plate - KF-25 Series
Most Wished For
-【Strong and durable】 made of high-quality aluminum alloy with 25mm ball diameter. the maximum load is 8kg/17.63lbs, so you don't have to worry about damaging your camera.
-【Strong stability】 The tripod head has a strong locking force. And it is equipped with a level to keep the camera in balance.
-【360 degree rotation】 Using the 3 buttons to control the sphere and panorama, you can set the camera to different angles. Using the ruler on the ball head, you can find the best angle for shooting.
-【High Compatibility】 With 1/4" thread and removable quick release plate, suitable for all SLR cameras. The lower 3/8 screw hole can be used to mount the tripod head on a tripod, monopod or camera slider. This makes it easy to solve your problematic little problems. Lower 3/8 screw hole for mounting the tripod head on a tripod, monopod or camera slider
-【Compact and portable】 Only 80mm in height and weighing only 205g, easy to carry
Original Price A$54.99
Discounted Price A$39.99
Total Save A$15.00
Phone Holder for DJI Osmo Pocket 3, Cell Phone Mount Expansion Accessories with 1/4" Thread Hole Used with Tripod and Extension Rod
Most Wished For
-Specifically designed for DJI Osmo Pocket 3, seamlessly integrate your smartphone with Pocket 3 for expanded screen view and easier camera control.
-Premium Durability: The connecting base is made of aluminum alloy, CNC processed and anodized, and the phone clamp is made of high-quality PC+ABS plastic and stainless steel to ensure a safe and stable connection between the phone and Pocket3.
-Versatile Orientation: The phone clip supports 360-degree horizontal and vertical shooting angle adjustment, and 180-degree pitch angle adjustment, adapting to shooting and monitoring at various angles.
-Rich expansion:There are 6 additional 1/4 ports at the bottom of the base plate, a total of 8 1/4 ports. The phone clip has a cold shoe and a 1/4 port. You can easily install tripods, selfie sticks, fill lights, microphones and other equipment to enhance the shooting effect.
Original Price A$90.99
Discounted Price A$47.99
Total Save A$43.00
6" Magic Arm with Super Clamp, Magic Arm Clamp Kit with 1/4" & 3/8" Thread Screw, Articulating Friction Arm with Cold Shoe Clamp Mount for Monitor, LED Light, Webcam, Action Camera
Most Wished For
-[MULTIFUNCTIONAL COMBINATION] - K&F Concept 6-Inch magic arm clamp can be used with a variety of camera accessories. Whether you are shooting from high or low angles, it meets different creative needs and explores different shooting angles.
-[360° ADJUSTABLE MAGIC ARM] - Magic arm camera mount 360° dual ball head design for better flexibility, easily adjust the device in the ideal position. Both ends of the magic arm are equipped with 1/4" screws for attaching camera, flash, microphone, webcam, monitor and action camera.
-[STURDY SUPER CLAMP] - The super clamp magic arm can be mounted on poles, posts, tripods, tables, desks, bicycle/motorcycle handlebars, and attached to cages, monitors, lights, flash, action cameras via 1/4" and 3/8" locating holes. It can open a maximum of 55mm and a minimum of 15mm.
-[ANTI-SCRATCH DESIGN] -There are 2 cushions on the crab clamp and 1 circular rubber pad at the top of magic arm. These cushions not only increase friction but also protect the equipment and the clamping area from wear. *NOTE: The maximum load is 2kg.
-[EASY TO ADJUSTABLE] - All joints of the magic arm with super clamp can be loosened or tightened at the same time with the thumbscrews. When the thumbscrews are loosened, the ball head is free to rotate 360° and arm can be positioned at various angles. Tightening the thumbscrew locks the ball joint and articulating arm in place.
Original Price A$43.35
Discounted Price A$40.99
Total Save A$2.36
9.8
Most Wished For
-[MULTIFUNCTIONAL COMBINATION] - K&F Concept 9.8-Inch magic arm clamp can be used with a variety of camera accessories. Whether you are shooting from high or low angles, it meets different creative needs and explores different shooting angles.
-[360° ADJUSTABLE MAGIC ARM] - Magic arm camera mount 360° dual ball head design for better flexibility, easily adjust the device in the ideal position. Both ends of the magic arm are equipped with 1/4" screws for attaching camera, flash, microphone, webcam, monitor and action camera.
-[STURDY SUPER CLAMP] - The super clamp magic arm can be mounted on poles, posts, tripods, tables, desks, bicycle/motorcycle handlebars, and attached to cages, monitors, lights, flash, action cameras via 1/4" and 3/8" locating holes. It can open a maximum of 55mm and a minimum of 15mm.
-[ANTI-SCRATCH DESIGN] -There are 2 cushions on the crab clamp and 1 circular rubber pad at the top of magic arm. These cushions not only increase friction but also protect the equipment and the clamping area from wear. *NOTE: The maximum load is 2kg.
-[EASY TO ADJUSTABLE] - All joints of the magic arm with super clamp can be loosened or tightened at the same time with the thumbscrews. When the thumbscrews are loosened, the ball head is free to rotate 360° and arm can be positioned at various angles. Tightening the thumbscrew locks the ball joint and articulating arm in place.
Original Price A$66.29
Discounted Price A$50.99
Total Save A$15.30
11
Most Wished For
-[MULTIFUNCTIONAL COMBINATION] - K&F Concept 11-Inch magic arm clamp can be used with a variety of camera accessories. Whether you are shooting from high or low angles, it meets different creative needs and explores different shooting angles.
-[360° ADJUSTABLE MAGIC ARM] - Magic arm camera mount 360° dual ball head design for better flexibility, easily adjust the device in the ideal position. Both ends of the magic arm are equipped with 1/4" screws for attaching camera, flash, microphone, webcam, monitor and action camera ect.
-[STURDY SUPER CLAMP] - The super clamp magic arm can be mounted on poles, posts, tripods, tables, desks, bicycle/motorcycle handlebars, and attached to cages, monitors, lights, flash, action cameras via 1/4" and 3/8" locating holes. It can open a maximum of 55mm and a minimum of 15mm.
-[ANTI-SCRATCH DESIGN] -There are 2 cushions on the crab clamp and 1 circular rubber pad at the top of magic arm. These cushions not only increase friction but also protect the equipment and the clamping area from wear. *NOTE: The maximum load is 2kg.
-[EASY TO ADJUSTABLE] - All joints of the magic arm with super clamp can be loosened or tightened at the same time with the thumbscrews. When the thumbscrews are loosened, the ball head is free to rotate 360° and arm can be positioned at various angles. Tightening the thumbscrew locks the ball joint and articulating arm in place.
Original Price A$53.36
Discounted Price A$44.47
Total Save A$8.89
77"/1.96m Camera Tripod, Video Tripod, Lightweight Travel Tripod, Tripod with 3-Way Head, Aluminium Camera Tripod for DSLR, Tripod for Smartphone with Mobile Phone Holder O234A5+BV01
Most Wished For
-【Lightweight and portable camera tripod】4-section leg can be adjusted tripod height from 51 cm to 177 cm; the travel tripod can be folded to 39 cm to easily put it in the carry bag; the net weight with the tripod head is only 1.26 kg. Ideal for travel and outdoor activities.
-【Efficient and flexible camera tripod】with powerful and quick click closure, only one hand can open and close all buttons in a few seconds. It is very easy to use, save more time and can focus more on enjoying the shooting.
-【More compatibility】this tripod camera with standard Arca-Swiss 1/4 inch thread is suitable for all cameras, such as DSLR camera from Canon, Nikon, Sony, Olympus, projector and telescope etc.; a mobile phone holder is included, camera stand can also be used as a mobile phone tripod, ideal for selfies, live transmission or vlogs when travelling.
-【Versatile tripod】the centre column inverted installation (also with a short centre column) to achieve the lowest angle shoot, arch shooting and special photography, new possibilities in photography.
-【3-way head】360 degree panoramic rotation allows you to take photos at any angle in horizontal and vertical direction; perfect for video and photo.
Original Price A$145.99
Discounted Price A$99.99
Total Save A$46.00
Camera Leveler Tripod Leveling Base Tri-Wheel Head for Macro Photography Aluminum Bubble Level 3 Axis Level with +/-5 Degree Precision Adjustment for DSLR Camera Rotator Panoramic Head 1/4'' To 3/8'' Adapter Braces
Most Wished For
-The tripod leveling base has 3 adjustment dials that enables the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is reached.
-The tri-Wheel leveler is designed for easy and precise leveling in scenery portrait video shooting. Adjusted level makes for smooth photos and thus easier stitching for panoramic photography.
-The camera lever is made of aircraft-grade aluminium material, CNC processing and hard-anodized anti-oxidation treatment with the surface, which enables long lifespan.
-The K&F Concept leveler leveling base is fitted between tripod and head.Designed with 3/8" male top stud and 3/8" female bottom Socket. Compatible with various tripods and cameras.
-With maximum load capacity 33 pounds/15 kilograms; lightweight design with weight about 0.44 pounds/0.2 kilogram; Ideal for outdoor travelling photographers
Original Price A$58.36
Discounted Price A$49.99
Total Save A$8.37
78"/198cm Aluminum Camera Tripod, 3-section Central Axis Travel Tripod with 32mm Metal Ball Head Load Capacity 26.4lbs/12KG, Suitable for DSLR Cameras
Most Wished For
-【Exclusive design of 3-section center axis】The innovative 3-section center axis design allows the tripod to obtain a higher shooting height of 78 inches/198cm, while maintaining a small folded length of 16.9 inches/43cm.
-【Practicality and Portability】The tripod is both practical and portable, the maximum height (without center column) reaches 53.1 inches (135cm) of stability, providing easy stability and optimized shooting height, perfect for indoor or outdoor For outdoor use; the maximum height of 78 inches (198 cm) makes standing shooting easier, and the minimum height of 22 inches (56 cm) makes this device easy and convenient to use in almost all conditions.
-【Lightweight and Portable】The 5-section legs can adjust the tripod height from 22"/56cm to 78"/198cm; Net weight including ball head is only 3.5 lbs/1.6 kg.
-【32mm Metal Ball Head】The 32mm metal ball head provides a load capacity of 26.4lbs/12KG and can be rotated to any angle you want, which helps to improve the camera's range of motion during panning. The 360-degree pan knob lets you set precise shots to capture the beauty of the landscape.
-【More Compatibility】This camera tripod with standard 1/4" thread can fit most Arca-Swiss quick release plates; 1/4" screw fits most cameras, DSLRs, projectors and telescopes, etc. .
Original Price A$283.99
Discounted Price A$142.99
Total Save A$141.00
GoPro Hero 8/7/6/5/4/3+/3/2/1/GOPRO HERO (2018)/DJI Osmo Action Action Camera Handy Case
Most Wished For
-Exclusively for GoPro HERO 10/9 action camera, precise mold opening, small size but large capacity, can accommodate 2.0 three-way selfie stick, battery + waterproof case + two-way charging box + camera and other small accessories at the same time;
-Two-way zipper, smooth and not stuck, unique rubber handle, easy to carry in appearance, and can also be directly stored in a backpack;
-By adjusting the shoulder straps, the excess shoulder straps can be put into the hidden storage space on the back, which can be easily turned into a handbag without affecting the appearance;
Original Price A$50.02
Discounted Price A$44.99
Total Save A$5.03
New Arrival
About Us

ABOUT KENTFAITH

-Enjoy Your Selected Digital Life

KentFaith as an end-consumer service provider, kentFaith is committed to improving consumer experience and providing consumers with the most suitable products. We have 150 patents and have won international product awards. We are popular in 200 countries and regions. We have been listening to the real needs of users and are committed to creating an ideal choice that meets your inner expectations and providing you with a convenient and practical exclusive shopping page.

20K + Products
56+ Countries and Regions
20Million+ Customers
150+ Patents
260+ Commercial Partners
1200+ Online and offine Retailers
20000+ Products
More Related Pages
A$17.99 - A$529.99
A$26.99 - A$269.99
A$14.99 - A$139.99
A$14.99 - A$85.99
A$59.99 - A$179.99
A$33.99 - A$110.99
A$19.49 - A$88.99
A$45.99 - A$99.99
A$35.99 - A$168.00
A$39.99 - A$313.99
A$17.99 - A$179.99
A$45.99 - A$265.99