K&F Concept 64 inch/162cm DSLR Tripod,Lightweight and Compact Aluminum Camera Tripod with 360 Panorama Ball Head Quick Release Plate for Travel and Work B234A1+BH-28 (TM2324)

Upon receipt: The product is well packaged and arrives within the announced deadlines. There is an adjustable tripod, a carrying case and an explanatory note Use: The use is very simple, the feet are easily adjusted in height with three adjustable sections. The feet swivel 360°, and the column can thus be reversed and the device can be placed at the bottom for macro photos. The support for fixing the device has a small spirit level, a nice trick to know if you are horizontal on outdoor terrain. The support is mounted on a ball joint which therefore allows photos with the device in landscape or portrait mode by tilting it at 90°. The hook located under the column is useful for fixing the transport bag and thus stabilize the column.All these well thought-out functions are very useful for varying the pleasures of photography and being able to take good shots in any situation. The materials are of excellent quality and the tripod is light, without being unstable. I particularly like: Directional ball jointThe carrying bagThe spirit levelI dislike: Nothing at all ;) I recommend it 200%Product received with a discount in exchange for an honest and impartial comment

This is a 4-section aluminum tripod, supplied with a storage bag. Compact, this tripod measures only 46 cm when folded. The ball joint is positioned between the 3 legs to maximize space. For information, it measures 59 cm unfolded with the central column minium. What to remember: ↪️ Weight: 1360 grams (with ball joint) ↪️ Maximum load supported: 8 kg ↪️ Minimum height: 41 cm ↪️ Maximum height central column output : 159 cmTo deploy the tripod there is a latch to lock or unlock the sections and slide them out. The feet are adjustable from three angles, by pressing the button and choosing the desired angle. A hook is located at the bottom of the main column, in order to hang a bag there for example, and to optimize stability of the tripod thanks to its counterweight. Equipped with a Ball head, it is an essential accessory with a tripod. Thanks to the central ball, and a knob, it is possible to orient the camera in all directions: 360°, tilting... With its quick fastening system, all you have to do is fix the support on your camera, and fix the everything on the ball joint in a few seconds, thanks to its wheel on the side. The support has anti-slip pads slightly raised so as not to scratch the camera once fixed on it. To see all this in detail, I have attached a video with this comment.

Small tripod from the K&F Concept brand. First, you receive the tripod in its storage bag. The bag is 50cm long. A priori, it looks of good quality and in addition the bottom is reinforced, thick enough to prevent shocks. You can carry it with the small handles or you can equip it with the shoulder strap. There is also a small velvet bag which is provided. In terms of dimensions, when it is folded up, head down, it is 47cm. Otherwise when it is folded but this time head up, it is 60cm. On the weight side, it weighs 1kg 280g on my scale. The tubes, the branches are made of aluminum alloy with magnesium, which is supposed to make the material resistant to corrosion and abrasion. On one of the branches, there is a small non-slip sponge, which is rather comfortable to handle and it is true, outdoors, the metal can be very cold, and there, suddenly, we will be able to carry it there. In terms of use, it's quite simple. At the top of each branch, we have the angle adjustment. So there are three positions. You can also flip the column around to do a ground level, macro shot. You just have to unscrew the small hook with the rubber. We take out the column, and we go upside down. There is also a small support hook to weight the tripod. At the maximum height, when the 3 sections are extended and it is set on the first position, with the smallest angle, the tripod rises, from the ground to the top of the fluid head, at 159cm. On the ball joint side, there are two direction clamps. The first is pan rotation. Besides, there is a value scale. So it can be landmarks, for example to take a panoramic photo. Also when it is loosened, there is a resistance friction effect. So it can also allow in video to make fairly fluid panoramic movements. Then, the second tightening above, controls the ball joint and we also have the small notch for portrait mode at 90°; it's always a pleasure. And then above, classic, we have the fast plate. You have to unscrew to release it. Also there is the small tightening aid, it is very practical. It avoids using a part or damaging your thumb. And then there is also the small spirit level. If you don't like the ball joint, you can replace it. We can unscrew it. Then we have a 3/8'' screw, and then there, we can mount a new ball joint. I've been using it for a few months now. use for photo and video. No particular concerns so far. A good little tripod, for a first purchase. I recommend. I will keep this comment updated, if problems arise. If you found this comment useful, please click on yes, you will make me happy :)

The first thing that stands out when opening the box is the quality of the presentation and the finish of the set, delivered in a handy carrying bag 50 cm long by 15 cm in diameter. The ball head is protected in a small velor bag. discretion. The locking valves and clamping rings work perfectly and silently, the ball head is mounted on a graduated turret, ideal for making panoramic shots in several successive shots. The turret also has a spirit level which facilitates its horizontal positioning: even if the accuracy of the level does not is not sufficient to guarantee perfect horizontality, thus saving time during installation. stability, especially in high winds: simple and clever. The plate is equipped with a removable sole to be fixed on the screw thread of the camera or the video camera, very easy then to lock on the top of the turret thanks to to a large clamping screw. In use, the foot is implemented very easily and fairly quickly, especially if the sole is already attached to the base of the camera. It is also possible to carry out an inverted assembly by placing the central tube upside down in the sliding ring, interesting for shots at ground level. All the knobs and tightening controls are well sized and can be handled without difficulty, even with gloves. I have not found any fault with this very complete, robust, well-designed and very practical accessory to use.

Received quickly. The quality and finishes are very good. Very light, good size. The ball joint is very pleasant and reliable. It is equipped with a handy spirit level I use it with my camera and a telescope. Very good product

First of all, I would like to point out that I received this product for free in exchange for an honest and impartial opinion. Tripod arrived quickly and well packaged. This tripod is supplied with a very practical protective cover which protects it very well. A strap is also provided to carry it over the shoulder. In the folded position, the tripod is very compact and does not measure more than 50 cm. Once unfolded to the maximum, it goes up to 1.70 m. The legs have three levels of telescoping as well as three degrees of inclination. The tripod head can tilt in all directions with three axes of rotation and the rings tighten well in order to retain your reflex, even in an inclined position (tested with a Canon 450d with 18-55mm lens). ensure that his camera is flat! Finally the finishes are good and it's a nice object! In conclusion: a very good surprise at this price which replaced my old bulky tripod! I highly recommend !

Didn't think that you could get such a great tripod for the price. Small, light, quick to set up and even with the tripod neck fully extended, the camera is very stable. The tripod head is very well made. It can be aritified and solved as you need it. A nice mechanism for panorama shots is also integrated. The quick-release plate is practical and can be attached securely with a screw. The camera is stuck. To make things easier, a spirit level is attached to the tripod head and weights can be attached to the hook at the bottom to get a very firm footing. The folding mechanism must be on the feet smooth-running and holds very firmly. The tripod bag is padded and fits well in the hand. I think that in this price range it can hardly be surpassed in terms of value for money.

I had the opportunity to test a travel tripod from K&F Concept. What interested me the most was the weight, the quick-release fasteners on the legs, a comfortable working height for me, the handling of the ball head (I'm not a fan of it) and the price When the tripod arrived I was immediately surprised... it comes in an easy-to-carry bag and the ball head is protected with a small pouch. An imbus and (admittedly) somewhat sparse instructions are also included. But ... do you urgently need instructions for the tripod? The handling of the clamp locks is good and I quickly get the hang of it. So the tripod can be set up and taken down quickly. The removable plate is screwed under the camera as usual and is then NOT fastened with a quick release, but is screwed. But that works fine. The height is 1.33m and the center column allows it to be extended up to 1.56m. That's a comfortable working height for both me and Markus... and yeah, it's stable, even with the 5D on top. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. 33m and through the center column it can be extended up to 1.56m. That's a comfortable working height for both me and Markus... and yeah, it's stable, even with the 5D on top. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. 33m and through the center column it can be extended up to 1.56m. That's a comfortable working height for both me and Markus... and yeah, it's stable, even with the 5D on top. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. That's a comfortable working height for both me and Markus... and yeah, it's stable, even with the 5D on top. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. That's a comfortable working height for both me and Markus... and yeah, it's stable, even with the 5D on top. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. The ball head also held the weight of the 5D well ... can be adjusted so that I am even enthusiastic as a ball head anti. I did find a small flaw. There is a spirit level on the tripod, but it's covered when the camera is mounted...that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. which, however, is covered when the camera is mounted ... that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again. which, however, is covered when the camera is mounted ... that's a bit of a shame when you have to move the tripod. But I can get over it. The price is quite low at €70... but the quality of the tripod really surprised me. My conclusion: I've found a good and cheap seller... I'll definitely buy from K&F Concept if I need something again.

This tripod is one of a kind and I am very happy that I bought this tripod! It is very stable and each of these three legs can be adjusted to three other different lengths. (See pictures) It also has two more swivel heads at the top of the head where the camera is attached. Once the camera can be moved circularly on the tripod and once stably to the left and right. There is also a spirit level at the top. (See pictures) You also get a carrying bag with the tripod. This bag is neither too big nor too small. (But everyone has to decide that for themselves). How the tripod is stowed in the bag can also be seen in the pictures. With the colors black (tripod), gold (upper lever device) and with orange lettering (the brand) it looks Tripod looks really good. Rubber heads are still attached to the feet. Thus, the tripod is stable even on smooth ground. (See image)

I got the gold and black model and I love it! I think it's great for my Sony Alpha 6400! It's very firm, steering and panning works without a problem and I would definitely recommend it! Much more stable than other tripods in this price range that I have tested! :)