• 26.99
Overall Rating 4.8   28
5
The price was cheap so I found it sloppy, but I was a little surprised at how well built it was. I tried wearing and using an FD aspherical lens and the infinity came out perfectly. Next. I plan to buy one for the M mount.
28/05/2023
5
I use it on the M3! It doesn't rattle etc. and I'm satisfied that it's easy to use ♪
No particular complaints!
27/05/2023
5
If the crush ring is not attached in the Lock position, the aperture blade will not move in the Open position. The EOS M-mount adapter is built better than the SONY E-mount adapter with just the narrower pin (laughs), but despite the fact that the body is too small, the lens weighs quite a bit. So if it is not an adapter with a tripod seat, the mount and the camera screw will be put under enormous stress. Most importantly, FD adapters don't require any tools, and there are few things that detach the tripod seat, so that's an issue.
26/05/2023
5
I can reuse my FDs!!! With the EOS FF and APSC that wasn't possible except with adapters that didn't allow for infinity focus and with a lens that spoiled the goodness of the optics. Thanks to this adapter, everything works great on the EOS M (I have an M6). Obviously in the manual.
25/05/2023
5
Works perfectly, Canon fd 50mm f1.8 and Vivitar Series 1 70-210 f3.5 come alive again on the mirrorless Canon M5. Really happy with it!!!
24/05/2023
5
can use it with no problems. I think the processing accuracy is high. I was surprised at how it looked on the FD lens, which is quite old.
23/05/2023
5
wasn't expecting much but I bought the EOS-M5 for the M42 mount and the FD at the same time. Now that I'm sick of the M lenses, I could use my old favorite lens and I had fun releasing the EOS-M5. Compared to the M42 mount, the FD can be locked and opened (checking with the new FD, with the old FD?) So there's no problem aligning the pins with the opening and then shrinking the aperture. Having previously set the aperture, set the switch pin to OPEN, switch to LOCK and release the shutter button. It is easy to use and FDs have come into play frequently. The construction was better than expected and there are infinite points so there are no complaints, but if I had to express my wishes it would have been nice if it was a little thinner without being bulky.
Comfortable FD lenses with the CANON EOS-M5 Comfortable FD lenses with the CANON EOS-M5
22/05/2023
5
High expectations for this lens not needed but it allowed me to use the old lens and I tested it which worked beautifully. It will cause some difficulties for me to use it for the first time, but look it up online to see how it works. I did it and it worked fine.
21/05/2023
5
Bought the wrong adapter. The quality of the adapter is very good, a well built device, I got the right one and I am very happy that the adapter fits well and I can now put an old vintage lens on my new tech camera. Overall happy with my services which is why I gave 5 stars. The company easily refunded me upon my return.
20/05/2023
4
Seams reasonably sturdy. Works with old and new(er) FD lenses. The ring that moves the DoF preview lever does not have a positive detent.
19/05/2023