Kentfaith Deals Today Most Wished For Lee Filters Standard Lens Hood Kentfaith is committed to creating the ideal Lee Filters Standard Lens Hood envisioned by users, redefining the Lee Filters Standard Lens Hood experience through exquisite craftsmanship. To meet your most desired perfect choice, enjoy today's promotion.
58mm Threaded Screw-in Lens Hood Universal with Cleaning Cloth
Most Wished For
-When taking backlight, sidelight or flash photography, the hood can effectively prevent unnecessary light interference and improve the picture quality.
-The high-quality composite material can protect the lens when you go out for shooting, and is anti-fall, bump-proof, and wear-resistant.
-It is produced in strict accordance with the lens screw specifications to avoid light leakage and vignetting. There will be no abnormal noise or looseness after installation. (Not suitable for wide-angle shooting, cannot be smaller than 25mm focal length)
-A vacuum-packed microfiber cleaning cloth is included to ensure that it does not damage the lens and filter, and can easily remove dirt without leaving any dust.
-NOTE: Our lens hood is compatible with all 58mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø58 = 58mm lens thread size. This is a non-reversible hood.
Original Price A$20.79
Discounted Price A$15.99
Total Save A$4.80
52mm Threaded Screw-in Lens Hood Universal with Cleaning Cloth
Most Wished For
-When taking backlight, sidelight or flash photography, the hood can effectively prevent unnecessary light interference and improve the picture quality.
-The high-quality composite material can protect the lens when you go out for shooting, and is anti-fall, bump-proof, and wear-resistant.
-It is produced in strict accordance with the lens screw specifications to avoid light leakage and vignetting. There will be no abnormal noise or looseness after installation. (Not suitable for wide-angle shooting, cannot be smaller than 25mm focal length)
-A vacuum-packed microfiber cleaning cloth is included to ensure that it does not damage the lens and filter, and can easily remove dirt without leaving any dust.
-NOTE: Our lens hood is compatible with all 52mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø52 = 52mm lens thread size. This is a non-reversible hood.
Original Price A$20.79
Discounted Price A$15.99
Total Save A$4.80
67mm Threaded Screw-in Lens Hood Universal with Cleaning Cloth
Most Wished For
-When taking backlight, sidelight or flash photography, the hood can effectively prevent unnecessary light interference and improve the picture quality.
-The high-quality composite material can protect the lens when you go out for shooting, and is anti-fall, bump-proof, and wear-resistant.
-It is produced in strict accordance with the lens screw specifications to avoid light leakage and vignetting. There will be no abnormal noise or looseness after installation. (Not suitable for wide-angle shooting, cannot be smaller than 25mm focal length)
-A vacuum-packed microfiber cleaning cloth is included to ensure that it does not damage the lens and filter, and can easily remove dirt without leaving any dust.
-NOTE: Our lens hood is compatible with all 67mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø67 = 67mm lens thread size. This is a non-reversible hood.
Original Price A$16.66
Discounted Price A$15.99
Total Save A$0.67
Fuji X100 Lens Hood+Lens Cap Compatible with Fuji X100, X100F, X100S, X100T, X100V, X100VI
Most Wished For
-Uniquely designed lens hood and lens cap for Fuji X100 series camera filters, perfectly matching the classic retro look of the camera.
-Square metal lens hood, compatible with Fuji X100VI X100V X100F X100T X100S X100 cameras.
-The hood is made of aluminum alloy, which can effectively prevent stray light and improve image clarity, while protecting the lens from scratches and accidental impacts.
-The hood is threaded and the push rod can be fixed to the desired hood angle, which is easy to fix.
-The lens cap made of aluminum alloy can better protect the filter, with high strength, impact resistance, sturdiness and durability. Note: Only suitable for K&F Concept hood.
Original Price A$45.02
Discounted Price A$42.99
Total Save A$2.03
K&F Concept Canon ES65B bayonet hood, with a vacuum cleaning cloth *1, for RF 50mm F1.8STM lens
Most Wished For
-Compatible: Compatible with Canon RF 50mm F1.8 STM Lens, Replacement for ES-65B Lens Hood.
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 43mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price A$21.67
Discounted Price A$19.99
Total Save A$1.68
K&F Concept Canon EW78F bayonet hood with a vacuum cleaning cloth *1, suitable for RF 24-240 mm F4-6.3 lens
Most Wished For
-Compatible: Compatible with Canon RF 24- 240 mm F4-6.3 IS USM Lens, Replacement for EW-78F Lens Hood.
-Elevate Image Quality: The K&F Concept Lens Hood can effectively prevent stray light from affecting the image and improve image quality. Preventing the entry of non-imaging light and avoiding glare in backlight, side light, or flash photography. Avoiding the surrounding scattered light into the lens in downlight and sidelight photography. Avoid the surrounding interference light into the lens in light photography or night photography
-Protect Lens: The K&F Concept lens hood is made of high-quality composite material, durable, and wear-resistant, can effectively protect the lens by preventing fingers from accidentally touching the lens surface, preventing dust, water droplets, and other foreign objects from entering the lens, and protect the lens from accidental collisions.
-Snap-On Design: Quick install and remove, 72mm lens cap, UV and other effect filters can still be attached after installation.
-Portable: Made of premium ABS material, it's lightweight and reversible, easy to carry.
Original Price A$21.67
Discounted Price A$19.99
Total Save A$1.68
Charging Adapter Base for DJI Osmo Pocket 3, Desktop Type-C Charging Dock Fit Arca-Swiss Standard, with 1/4 Screw Hole/Folding Finger, Aluminum Alloy Bracket
Most Wished For
-【Pocket 3 Charging Adapter Mount】The Pocket 3 charging adapter mount allows you to change the direction of the charging port, allowing the Pocket 3 to stand independently on a flat surface for charging and taking photos at the same time.
-【Universal Compatibility & Multifunctional Design】. The 1/4 screw holes on the bottom of the stand are compatible with most tripods, headbands, chest straps, selfie sticks and other accessories. Folding fingers come with a metal T-screw that can be attached to headbands, chest straps, backpack clips or any accessory that can be fitted with a dual tooth connector.
-【High Quality Aluminium Alloy】The Pocket 3 charging base is made of aluminium alloy with good abrasion resistance and corrosion resistance, which can maintain stable performance and prolong the service life even in harsh environments.
-【Standard Bayonet】The standard 38mm Arca bayonet design on both sides allows accurate mounting on the head without compromising charging efficiency.The charging adapter is easy to install, just insert the charging head into the charging port, and the metal clips on both sides will automatically lock.
-【Safe to Use】The contact surface of the metal clips is rounded and polished, and there is a silicone pad under the charging connector to protect the Pocket 3 from scratches.
Original Price A$36.68
Discounted Price A$31.99
Total Save A$4.69
2Pack Quick Release Adapter Mount for DJI Osmo Pocket 3 Create Combo, Tripod Mount Fit Arca-Swiss Standard, with 1/4 Screw Hole/Folding Finger,Aluminum Alloy Bracket
Most Wished For
-2Pack Expansion Adapter Mount for DJI Osmo Pocket 3: This base from K&F Concept are specially designed for DJI Osmo Pocket 3, which is tailor-made according to the real machine size, with tight stitching, perfectly adapted to the bottom of Pocket 3. Anti-slip silicone pad is adopted to protect the camera from scratches. This pack is equipped with a two-piece set to facilitate quick switching between various accessories, and never miss any wonderful moments.
-1/4" Screw Hole & Arca Type Base: Compatible with most tripods, ball head, super clamp, selfie sticks, and other accessories, so you can easily connect Pocket3 to various devices.
-Magnetic Folding Fingers: Use pocket 3 like an action camera, use with the supplied thumb screw and quick-release buckle, it can be mounted on headbands, chest straps, backpack clips, or any accessory that can be fitted with a folding finger, and can be folded up for easy storage and space-saving when not needed.
-Quick Installation: Symmetrical design, no need to distinguish the front and back sides, can be installed quickly. NOTE: Please press the top of the side safety clips to make sure it's locked.
-Desktop Mount:The quick removal base covers larger area and is flat, so it can let your camera stand securely on the table.
Original Price A$76.99
Discounted Price A$46.99
Total Save A$30.00
Fuji X100 Lens MCUV Filter Kit with Lens Hood and Lens Caps , Multi Coated HD Optical Glass Scratch-resistant Compatible with Fuji X100, X100F, X100S, X100T, X100V, X100VI (Black)
Most Wished For
-【Compatible】Compatible with Fujifilm camera X100/X100F/X100S/X100T/X100V/X100VI.
-【Optical Glass & Multi-Coated】The UV Filter is made of imported AGC optical glass, up to 99.6% light transmission rate with 28 layers double sides waterproof and scratch resistant coatings. It can reduces ultraviolet light, helps eliminate bluish cast in images. Protects lens from dust, dirt, and scratches.
-【Magnetic Design】The UV filter front frame adopts a magnetic + thread design, which allow 52mm magnetic filter to be installed on it. It provide more option for your creativity.
-【Square Lens Hood】The square lens hood harmonizes with the camera retro style, titanium silver appearance merge into the origin color of camera. The hood is threaded and the push rod can be fixed to the desired hood angle, which is easy to fix.
-【Lens Cap】The lens cap made of aluminum alloy can better protect the filter, with high strength, impact resistance, sturdiness and durability. Note: Only suitable for K&F Concept hood.
Original Price A$75.04
Discounted Price A$71.99
Total Save A$3.05
K&F CONCEPT Mini On-Camera Flash GN12, 5600K, 2000mAh Built-in Battery, Compatible with Canon, Fuji, Sony, Nikon, Panasonic, Olympus, Pentax & Other DSLR/Mirrorless Cameras with Standard Hot Shoe.
Most Wished For
-【Standard Single-Contact Hot Shoe】The KF-M01 Mini Flash is compatible with major camera brands including Canon, Sony, Nikon, Panasonic, Olympus, Pentax, and digital cameras. Note: Not compatible with Sony ZV-1F, Canon EOS Rebel SL3/250D, T7/1500D/2000D, or T100/3000D/4000D/200DII. Please check your device before purchase.
-【Pro Flash】GN12, 5600K color temp, fast recycle time (0.1–1.8s), 8-level output (1/1–1/128), ideal for low-light shooting.
-【Built-in LCD Screen for Easy Operation】Clearly displays mode, power level, and battery status for intuitive control.
-【Long Battery Life】Built-in 2000mAh battery supports 500 full-power flashes. USB-C rechargeable (no charging while in use). No extra batteries needed—more efficient and eco-friendly than AA-powered flashes.
-【Compact & Lightweight】Measures just 7.3×7×4.6cm and weighs 128g—easy to carry, no burden during long shoots.
Original Price A$71.71
Discounted Price A$67.99
Total Save A$3.72
New Arrival
About Us

ABOUT KENTFAITH

-Enjoy Your Selected Digital Life

KentFaith as an end-consumer service provider, kentFaith is committed to improving consumer experience and providing consumers with the most suitable products. We have 150 patents and have won international product awards. We are popular in 200 countries and regions. We have been listening to the real needs of users and are committed to creating an ideal choice that meets your inner expectations and providing you with a convenient and practical exclusive shopping page.

20K + Products
56+ Countries and Regions
20Million+ Customers
150+ Patents
260+ Commercial Partners
1200+ Online and offine Retailers
20000+ Products
More Related Pages
A$41.99 - A$55.99
A$51.99 - A$819.99
A$14.99 - A$128.99
A$22.99 - A$75.99
A$22.99 - A$52.99
A$12.99 - A$149.96
A$16.99 - A$130.99
A$15.99 - A$124.99
A$53.99 - A$162.99