86mm MCUV Protection Filter Multi-Resistant Coating Slim Frame Nano-Klear

SKU: KF01.K86

Hello, does the filter fit the lumix fz300?

The filter must have a thread diameter of 52mm on the FZ300. The filter must therefore be ordered in size 52mm!

How many mm is the external thread?

Both threads are 67mm to attach additional filters.

How many layers of glass does the filter have?

Has only one layer of glass but is multiply coated

Does it fit on the fz1000 ii or do I need a different size

Dear Sir or Madam, As long as the lens size is right, it will fit your lens!

Is it possible to remove the filter glass from the screw frame without destroying it? glued glass or clip attachment or similar?

Why should you do this? I don't think that's possible, and that's not the purpose of the filter either

Hello everyone. i am going to buy uv filters but i have some questions about this product. is this filter strong enough to protect the camera?

The UV filter is good for protecting the front lens from contamination and the inner workings of your lens from UV radiation. Good filters swallow almost no light and have no color cast. In most cases, however, the UV protection of the lenses in the lens is not necessary, since they are already coated and have their own protection. The filters do a good job of protecting against dirt and scratches.

How big is the 46mm filter when screwed in? So how thick is the frame without the external thread that sits in the lens?

3mm

What is the pitch of the filter thread? 0.75?

The filter has the same thread pitch as any other standard photo filter.

How many coatings?

16 layer coatings

why do some say 28 layers and some say 18 layers?

Hi, different layers with different effect, the 18 layer is our K series, for beginner, if you request waterproofing of the filter, you can order D-series, with 24 layers, and the 28 layers is X-series, waterproof and scratch-resistant, with 99.6% transmittance.