This mounting for the DJI Osmo action cameras from K&F Concept comes in a simple plastic window pouch along with a small product information sheet.The mount attaches to the magnetic clip on the action camera or the plastic frame if you have that installed, and gives the option to mount the camera on either a camera's or accessory's shoe clip, or to bolt it onto a tripod using the standard 1/4-inch thread.The mount has orange aluminium alloy clips either side to latch onto the action camera together with the magnetic clamp. This means it's not reliant on the magnetic properties which often aren't sufficient to hold the camera alone. The clips operate smoothly without too much spring resistance, and hold the camera in place very effectively. There is also a silicone ribbed pad on the base to prevent slippage and provide a little cushioning.The top part of the mount can be tilted forwards and backwards. It only uses friction to hold it at the selected angle, so this pivot point has the potential to wear over time and become looser. There's also no notch feeling to help indicate when the mount is moved back to the vertical position which would be useful.The cold shoe attachment has a clamp ring which can be tightened to keep the mount in place.The 1/4-inch thread on the base is made from brass and has good depth which should accommodate the bolts found on most tripod and other camera clamps.In use with our Action 5 Pro camera the mount snapped into place, held the camera securely, released it readily when the side clips were squeezed, and looked very professional.This mount is well-made and gives some nice extra secure mounting options. We use tripod-mounted cameras quite a bit, so having the Action 5 Pro now able to use them too is a great bonus.